PS5 Controller Test: Free Online DualSense Tester

Plug in your PS5 controller and press any button. This page shows what your browser receives from it, so you can check every button, both triggers, both sticks and any drift. Rumble works in some browsers. There's nothing to install.

Awaiting Controller Connection...
Connect your PS5 controller via USB or Bluetooth and press any button to begin.

No PS5 Controller Detected Yet

Plug in your PS5 DualSense controller with a USB cable or pair it via Bluetooth, then press any button (such as ✕, ○, or the PS button) so your browser detects it.

The full interactive testing dashboard will open automatically the moment your controller responds.
Inputs Tested: 0 of 18
L2 R2 L1 R1 TOUCHPAD L3 R3
Left DualSense Stick In Deadzone
X: 0.000 Y: 0.000 Mag: 0%
DualSense Triggers Depth
L2: 0%
R2: 0%
Right DualSense Stick In Deadzone
X: 0.000 Y: 0.000 Mag: 0%
DualSense Stick Drift & Deadzone Calibration
Offset above the deadzone may indicate stick drift when sticks are at rest.
PS5 DualSense Haptic Rumble Test

PS5 Controller Test Online

How to Test a PS5 Controller

Testing a PS5 controller only takes a few simple steps:

1

Connect your DualSense

Connect the PS5 controller to your computer with a USB cable or Bluetooth. USB can be useful when you are checking connection problems because it removes possible wireless issues.

2

Open the PS5 controller tester

Keep the tester page open and press a button on the controller. The browser should detect the connected gamepad and show its available inputs.

3

Test the buttons and triggers

Press the Cross, Circle, Square and Triangle buttons, D-pad, shoulder buttons and stick buttons one by one. Slowly press both triggers and check that their values change as you move them.

4

Check the analog sticks

Move both sticks in different directions and then release them. Watch the values while the sticks are centered. If an axis keeps moving when you are not touching the stick, it may indicate a drift problem.

5

Test vibration

Run the vibration or rumble test if your browser and controller expose this feature. A working response means the tester was able to send a supported vibration command to the controller.

PS5 Stick Drift Test

A PS5 controller drift test is useful when your character moves by itself or the camera slowly turns without touching the stick.

Leave the left and right sticks completely alone and watch their readings. A small change can happen because of controller hardware and calibration, but continuous movement away from the center may point to PS5 stick drift.

You can repeat the test with both sticks to see whether the problem is coming from one side or both.

PS5 Controller Vibration Test

The PS5 controller vibration test checks whether supported rumble or vibration output can be triggered through the browser.

This can help when your DualSense vibrates in some games but you are not sure whether the controller itself is responding correctly. Browser, operating system and controller support can affect the result, so a missing vibration response does not always mean the hardware is damaged.

This also makes the tester useful for searches such as a PS5 rumble test or a DualSense vibration check.

DualSense Controller Tester for PC

You can use a DualSense controller tester on a PC after connecting your PS5 controller through USB or supported Bluetooth.

The tester can show the inputs that your browser receives from the controller. This is useful if a button, trigger or stick behaves differently in a game and you want to check the controller separately.

If the controller is not detected, reconnect it, press a button while the tester page is active, or try another supported browser.

Adaptive Trigger Test on PC

Many users search for an adaptive trigger for the PS5 tester because they want to check the special resistance effect of the DualSense triggers.

The important difference is between normal trigger input and the actual adaptive trigger effect. A browser may be able to read the trigger position while not providing full access to the DualSense adaptive resistance system.

So, an adaptive trigger for a PS5 tester PC should not be treated as a complete hardware test unless the required haptic features are specifically supported. This tester focuses on the controller inputs that the browser can access.

PS5 Controller Latency Test

If you are checking controller response, you may also be looking for a PS5 controller latency test.

Browser testing can show observed input update timing or polling behavior, but it should not be considered a laboratory measurement of total input lag. USB or Bluetooth connection, browser timing and system performance can all affect the result.

For normal troubleshooting, the tester is useful for confirming that button and stick inputs are being received consistently.

What Can You Check With This Tester?

A PS5 controller test can help you check:

  • ● DualSense buttons and D-pad
  • ● Left and right analog sticks
  • ● Trigger input
  • ● Possible stick drift
  • ● Deadzone behavior
  • ● Supported vibration or rumble
  • ● Browser-reported input updates

The exact features available can depend on your browser, operating system and controller connection.

Why Test a PS5 Controller Online?

An online controller tester gives you a quick way to check the hardware before blaming a game or changing its settings.

For example, if a character keeps moving, you can test the stick directly. If a button is not responding, you can check whether the browser receives that input. If vibration is missing, you can see whether supported rumble commands produce a response.

This makes online controller testing useful for finding simple input problems before trying more complicated fixes.

What If Your PS5 Controller Is Not Detected?

First, make sure the controller is connected correctly and turned on. Press a button after opening the tester.

If Bluetooth does not work, try a USB connection. You can also try another USB port, reconnect the controller, or test the page in another modern browser.

Some USB cables only provide charging, so using a proper data cable can also make a difference.

FAQs

How do I test my PS5 controller? −

Connect your DualSense to a PC using USB or Bluetooth, open the tester and press the controller buttons. You can then check the available buttons, sticks, triggers and supported vibration features.

Can I test a PS5 controller on PC? +

Yes. A DualSense can be tested on a compatible PC browser when the controller is exposed through the browser's Gamepad API.

How can I test PS5 controller drift? +

Release both analog sticks and watch their values. If a stick continues reporting movement while it is untouched, repeat the test to check for possible drift.

Can I test DualSense vibration online? +

Yes, if vibration is supported by your controller, browser and operating system. Use the vibration test and check whether the controller responds.

Does this test adaptive triggers? +

The tester can check available trigger input, but browser support for the actual DualSense adaptive trigger resistance is limited and may not expose the full feature.

Can I test PS5 controller latency? +

You can observe browser-reported input timing, but this should not be treated as a complete measurement of real-world controller latency or total input lag.

Why is my PS5 controller not showing up? +

Reconnect the controller, press a button while the tester is open, try USB instead of Bluetooth, or test with another supported browser.

Dani Editor & Founder of Quick Gamepad Test
WRITTEN BY

Dani

Editor and owner of Quick Gamepad Test

A Gamer and games lover since 2017. I created Quick Gamepad Test to help gamers test their controllers and enjoy a better gaming experience. I love gaming and sharing useful tips with other gamers.


Last Updated: October 20, 2026